这是一个测试版的固件，支持DVD和蓝光的菜单播放功能。这个固件没有全方面测试，可能会有一些许的小问题。如果您不在乎这些小BUG，只希望能使用最新的功能，那么可以下载并测试。当然，你随时可以再刷回到之前的固件

支持HDMV文件(UJukebox功能)

1、这个固件最主要的特征是播放HDMV结构的文件时，所选择的音轨和字幕会保存在硬盘上，下次直接调用。
2、这个版本的固件并不支持‘BDMV’文件夹的所有功能，特别是蓝光1.1和2.0的规范，主要原因是硬件的限制。
3、蓝光原版的文件结构应该和蓝光碟上一样，否则TViX不能正常回放你的HDMV文件，或者是受保护的文件和有区码的蓝光原版文件。
4. The ‘Popup Menu’ when pressing the ‘Menu’ button of the remote control while watching HDMV files is either original graphic menu that the title supports or simple menu that Dvico made.
5. There are two ways to playback HDMV files
A. In case that you set the ‘Smart Navigation’ to ‘Smart’ in the TViX Setup Page, HDMV files automatically playback with selecting the main folder.
B. In case that you set the ‘Smart Navigation’ to ‘Normal’ in the TViX Setup Page, you need to select ‘index.bdmv’ files in the HDMV folder.
6. Possible to add the subtitle that HDMV files doesn't’t have.
A. If you want this additional subtitle to be default one, put the file on the same folder index.bdmv located and name must be ‘index.xxx’, for example, index.smi.
B. Possible to change to the additional subtitle while watching by using the ‘Function’ button on the remote control.
7. To change a subtitle language to another one while watching, either press the ‘Menu’ button or the ‘Subtitle’ button on the remote control.
8. To change audio track, press the ‘Audio’ button on the remote control.
9. To go to another chapter, press’ |??’ or ‘??|’ on the remote control or you can press 'Go to' key on the remote.
10. You can use 100 times this version of firmware. The TViX automatically counts down from 100, but it counts one in spite of playing HDMV files 10 times unless you boot the TViX.

*** Possible to play HDMV structured files compressed by ISO format, but you’ve got to select the file even if setting the ‘Smart Navigation’ to ‘Smart’.

在TViX设置页面里面设置UJukebox Mode：
1、设置到‘Lite’。
Dvico播放器只会弹出简单的播放导航菜单。

2、设置到‘Basic’ 。
弹出支持的蓝光原始内置导航菜单，如果不支持HDMV文件的话弹出Dvico内置的简单导航菜单。

HDMV files in IFO folder structure and ISO files.

Most HDMV files stored in IFO folder structure mainly consist of ‘BDMV’ and ‘Certificate’ folder. As explained above, there are two ways to playback the HDMV files, Smart Navigation and selecting index.bdmv. For stable performance, we recommend not to change the folder structure.
Files in ISO format must be selected to be played even if setting ‘Smart Navigation’ to ‘Smart’. ISO files may playback smoothly when played through the network.

注意：

*** An HD audio receiver and HDMI 1.3 cable are necessary to playback HDMV files.
*** In the TViX Setup page, set the ‘Audio’ to ‘Digital’, ‘HDMI Audio’ to ‘On’, and ‘HD Audio Pass Through’ to ‘On’.
*** It may not work properly in case of no 1.3 HDMI cable, HDMI to DVI connection and analog video mode.
*** Playing HDMV files in public places is strictly prohibited due to the laws and regulations related with license.
*** We recommend to set the ‘Auto Switch’ in the TViX Setup page to either ‘NTSC/1080p24Hz’ or ‘NTSC/PAL/1080p24Hz’, otherwise the resolution of subtitle and menu may not be clear or vivid. It’s one of the hardware limitations.